Amazone now offers, in addition to the already well-proven C-Mix shares, the new C-Mix Clip quick-change system for its Cenius mulch cultivator series to enable an even easier share change.
The simple, quick and, above all, time-saving change over from, for instance, a deep loosening with narrow shares to stubble work with goose foot shares, is possible without any problem. Thus the operating costs can be kept as low as possible
The C-Mix Clip share system consists, exactly like those of the well-known C-Mix shares, of a guide plate and a tip. However, on the C-Mix Clip system, the guide plate is fixed to the tine and the tip is then fixed on the quick change system.
After the initial, simple assembly of the C-Mix Clip bracket on to the tine, different share tips can be attached with the aid of an easily detachable locking pin according to the relevant operational purpose. The securing pin is guided at the reverse side of the tine through a hollow bolt and thus holds the relevant share tip safely on the C-Mix Clip bracket.
Depending on the operating conditions, Amazone offers an 80mm wide tine that is especially ideal for the intensive loosening at working depths of 12cm to 30cm and for achieving the perfect mix of organic matter down to the deeper soil layers.
In addition, a 100mm wide share tip is available, suitable for 10cm to 20cm working depth and is thus suitable both for the deeper stubble tillage and also for primary soil tillage. A 320mm wide goose foot share tip which is used for the shallow and overall stubble tillage of 3cm to 10cm is also available.
A special tool is available to firmly push the share onto the C-Mix Clip bracket. This offers additional assistance during the simple change by a reliably pushing on the share tips.
With the C-Mix quick-change system, Amazone has established a process that not only reduces the downtime expenditure, and thus the cost of a share change, but also a quick way to change the set-up of the cultivator.
For more information visit: www.amazone.co.uk.
