Pöttinger has introduced a newcomer to the Servo family – the 45S – which the company describes as a strong, reliable and robust all-rounder for the toughest applications.
Available as six-furrow Nova or Nova Plus versions, it’s designed for up to 350hp. On the Nova version, a frame-pivoting cylinder is provided as standard, while the Nova Plus version is supplied with a furrow-width memory cylinder.
With an inter-body spacing of 95cm, an under beam clearance of 80cm and the long, full-length main plough beam bearing that carries the main beam tube, all the requirements for tough applications are met in full. The use of high-tensile materials enables higher driving speeds and a longer service life. As standard, the six-furrow version is also fitted with double bearings on the mounting axle.
Thanks to the unique Servomatic control centre, the plough can be matched to the tractor quickly and easily. This enables a perfect setup to ensure the low draft of the Servo in all operating conditions. The leading body furrow width and pulling point can be adjusted individually without affecting each other. This is a great advantage, especially with hydraulic furrow width adjustment, since no correction is required. Just a few adjustments are needed and then the initial settings are finished.
Thanks to the large selection of different mould boards, from short turning mould boards to long drawn-out mould boards to slatted mould boards, every customer will find the ideal shape for their location.
The Traction expansion module makes it possible – even on Servo 45S six-furrow mounted ploughs – to transfer weight from the plough to the tractor. Transmitting force through the Traction system optimises the ground tracking of the plough at the same time as applying a permanent load to the rear wheels of the tractor. This reduces wheelslip and prevents harmful smearing of the soil surface caused by the rear wheels.
For more information visit: www.poettinger.at.
