The UX11200’s water capacity helps maximise work rates, but the sprayer is also packed with advanced features including its fill-level regulated hydro-pneumatic axle suspension with roll stabilisation and tall tyres up to a diameter of 1.95 m.
With a permissible road speed of up to 40km/hr, the sprayer comes as standard with an automatic braking force regulator and a support load of up to 3t on the hitch drawbar coupling. The UX11200 can be supplied with tyres as wide as 520mm.
The proven Super-L boom, with working widths from 24–40m, performs very well on this chassis and is folded in just as compactly as usual into the transport position.
As standard the chassis features a track-following steering rear axle system called SingleTrail for good ride characteristics and minimum wheel track damage. As an option, the UX11200 can also be equipped with the electronically controlled, DoubleTrail axle steering. The electronic track-following steering of both axles is not only of particular importance when in row crops such as potatoes or beet, but also for smaller field sizes. Here, true track-following to the tractor is excellently maintained and – above all – the boom is not negatively affected by any steering movement.
 |
| The DoubleTrail steering system is electronically controlled. |
The spray agent tank follows the functionality and design line of the rest of the UX range and features a low centre of gravity. The smooth tank shape allows the targeted use of fewer baffles, and without an internal clear water tank. The centre of gravity neutral, 1,000-litre fresh water tank is located between the two axles. With this large amount of fresh water on board, eightinternal cleaning nozzles and a hopper bottom optimised to keep residual volumes down to a minimum and washing out is no problem. With the Comfort-Pack fitted as standard the UX11200 comes with automatic fill stop, agitation intensity control and automatic cleaning.
The 750 lit/min pump system offers a guaranteed effective agitation capacity, even with low application rates or complex tank mixes. Depending on the individual operation, 500 lit/min can be used for agitation or up to 400 lit/min for maximum application rates with the optional HighFlow equipment.
The operator terminal features the well-proven in-house manufactured valve components and is neatly located and well protected behind the large cover. This cover helps to minimise any contamination of the control taps and yet offers very good access for quick and effective maintenance. In-cab control of the UX11200 comes from the new Amatron 3 terminal.
The suction capacity of the UX 11200 exceeds 900 lit/min via the four-inchsuction port reducing the filling time.
For more information visit: www.amazone.co.uk.
